Custom Solutions

Size & Structure

How the box opens and how it is built — the two decisions that constrain everything else.

Structure is the first decision and the hardest to change later. It fixes how the box opens, how strong it is, how much it weighs and how much of the cost sits in the construction rather than the finish.

We work from the product's exact dimensions — including the small clearances that make a box feel engineered rather than approximate — and propose two or three structures that suit the price point before anything is drawn in detail.

The brief behind it

Why structure is decided before design

Every later decision depends on structure. Once the opening mechanism is fixed, the panels have known sizes, the interior has a known volume and the hardware list is known. Change the structure after the design is developed and most of that work is redone.

It is also where the money is. Two boxes with the same exterior dimensions can differ by a large factor in cost depending on the joint, the wall thickness and whether the lid is hinged or lift-off. That is why we price the structural options before spending time on finish.

The final input is the product itself: its weight, its centre of gravity, whether it has a protruding part, and whether it needs to be lifted out by fingers or tipped out. Those facts set the internal cavity, which then sets the exterior.

What you can specify

Size & Structure — the decisions that matter

Every point below is developed with you and confirmed on a physical sample before production.

Opening structures

  • Lid-and-base with a flush or overhanging edge
  • Hinged lids with ribbon stop, chain or concealed hinges
  • Sliding lids and sliding trays
  • Drawer, book-style and clamshell constructions

Construction decisions

  • Internal dimensions fitted to the product with working clearance
  • Wall thickness tuned to weight, stacking and shipping method
  • Joint selection — finger, box or dovetail — by load and budget
  • Flat-pack options where freight volume outweighs assembly cost

What changes the cost

  • Hinges and stops add hardware and fitting labour
  • Thicker walls add material and freight weight
  • Drawers and book-style builds need more panels and more assembly
  • Flat-pack trades assembly labour at your end for lower freight

Not sure what to specify?

Send the product dimensions, an approximate quantity and the date you need it. We come back with structure, material and finish options — and a clear quotation.

Start a project

At a glance

Structure options at a glance

The five structures we use most, and the situation each one suits.

Lid & base
Cheapest and strongest. For products that do not need a hinged reveal.
Hinged lid
For a controlled reveal and repeated opening. Adds hardware and fitting cost.
Sliding lid
A softer, more casual opening. Needs a finger pull and tight tolerances.
Drawer
For sets presented in layers, or where the box is used like a case.
Book-style
For flat products and story-led reveals; the spine becomes a branding surface.
Clamshell
Two halves with a hinge along one edge; simple, light, and good for travel.

Why it matters

What structure constrains downstream

These are the choices this page decides. Getting them right at the sampling stage is what keeps cost and rework out of production.

Discuss your project

In practice

  • How much protection the box gives in transit
  • How much interior volume is left for the insert
  • The hardware list and therefore the fitting time
  • Whether the box can be re-closed reliably by the customer

Who buys this

Who this decision matters most to

The same product is specified very differently depending on who is buying it. These are the briefs we see most often.

  • Product developersThe structure determines whether the pack fits the product and the carton at the same time.
  • Brand ownersThe opening is the brand moment; a lift-off lid and a hinged lid say different things.
  • Operations teamsAssembly time, flat-pack choice and carton dimensions all come from the structure.
  • Buyers on a target priceStructure is the largest single lever on unit cost before finish is even discussed.

Common questions

Questions we get about size & structure

Can you build to dimensions I already have?

Yes. Send the product dimensions or, better, the product itself. We design the internal cavity around it rather than starting from a standard box size.

Does a hinged lid cost more than a lift-off lid?

Usually yes — hinges, stops and the fitting labour add cost. A lift-off lid is the cheapest structure; a hinged lid is chosen when the opening experience justifies it.

Can the box be flat-packed to save shipping?

Some structures can, and it meaningfully reduces freight volume. The trade-off is assembly time at your end, so it depends on where the box is being filled.

How much clearance should the product have?

Enough that it slides in without force and does not rattle. For most products that is a few millimetres on each side, adjusted for material thickness and finish.

Does wall thickness affect how premium it feels?

Yes, up to a point. A thicker edge reads more solid, but past a certain point it only adds weight and cost. We show the difference on samples rather than describing it.

What is the cheapest structure that still looks good?

A well-made lid-and-base with a sharp edge and a good finish. Most of the perceived quality comes from the edge, the joints and the surface rather than the mechanism.

Can the structure change after sampling?

It can, but at a cost — drawings, samples and sometimes tooling are redone. That is why we settle structure first and finish later.

Related

Also worth looking at

Interior Compartments & Inserts — illustrative product photo

Interior Compartments & Inserts

The inside is where the product is actually judged — and where transit damage is prevented.

Read more
Wood Species & Finishes — illustrative product photo

Wood Species & Finishes

The species sets the tone and the price; the finish decides how it feels and how long it lasts.

Read more
Wooden Presentation Boxes — illustrative product photo

Wooden Presentation Boxes

Showcase-grade boxes engineered so the product lands the moment the lid opens.

Read more

Back to the range

Tell us what you're making

Send the brief — we'll come back with structure, material and finish options for size & structure, plus a clear quotation.